BAS Combo Starter/Disconnect 1/10 thru 1hp 120v/230v
The BAS-1P protects single phase motors with an adjustable 1-16A class 10 electronic overload.

Basic Fail-Safe actuator for controlling dampers in typical commercial HVAC applications. Torque motor 180 in-lb [20 Nm]. Nominal voltage AC 24...240 V / DC 24...125 V. Control On/Off.

The LF series actuators provide true spring return operation for reliable fail-safe application and positive close off on air tight dampers. The spring return system provides consistent torque (35 in-lb [4 Nm]) to the damper with, and without, power applied to the actuator. The LF series provides 95° of rotation and is provided with a graduated position indicator

The NFB series actuators provide true spring return operation for reliable failsafe application and positive close off on air tight dampers. The spring return system provides constant torque (90 in-lb [10 Nm]) to the damper with and without, power applied to the actuator. The NFB series provides 95° of rotation and is provided with a graduated position indicator.

The TF series actuators provide true spring return operation for reliable fail-safe application and positive close off on air tight dampers. The spring return system provides consistent torque (22 in-lb [2.5 Nm]) to the damper with, and without, power applied to the actuator. The TF series provides 95° of rotation and is provided with a graduated position indicator showing 0° to 90°.

Select the Series 2000 Magnehelic® Gage for a versatile low differential pressure gage. Using Dwyer’s simple, frictionless Magnehelic® gage movement, it quickly indicates air or noncorrosive gas pressures--either positive, negative (vacuum) or differential. The design resists shock, vibration, over-pressures and is weatherproof to IP67.

Equipped with advanced I/O including Fireman’s Override and damper control, the BAS was designed from the ground up for easy integration with automation systems. With a 200 to 600V input and 1-40A adjustable overload, the BAS is the right starter for almost any job.
Available in the following models with Type 1 enclosure:

Designed for variable torque applications up to 600 hp (480V)*, the Cerus® X-Drive is Franklin Electric’s all-inclusive drive solution for a variety of markets. Available as a standalone drive, no disconnect or bypass included, in the following models:

Designed for variable torque applications, the Cerus® X-Drive is Franklin Electric’s all-inclusive drive solution for a variety of markets. Available with disconnect and Type 1 enclosure included, in the following models:

KG 6 - 5/16" Ball Joint for LF & TFB
Ball joint suitable for damper crank arm KH8

SH 8 - 5/16" Push Rod for LF & TFB
Push rod for KG6 & KG8 ball joints (36” L, 5/16” diameter).

ZG AFB - Damper Crank Arm for AFB and NFB
Mounting kit for linkage operation for flat and side installation

SH 10 - 36" Long 3/8" Push Rod for KG10A Ball Joint for AFB and NFB
Push rod for KG10A ball joint (36” L, 3/8” diameter).

ZG DC1 - Damper Clip for Damper Blade 3.5" Width

VFD 3 amp: 208v - .5HP / 230v - .5HP / 480v - 1HP
The Quick Link (Q-Link) variable frequency drive (VFD) provides a higher quality user experience. Q-Link features an organic light emitting diode (OLED) display, with an easy to use control interface and onboard navigation menu.

ZG 113 - TFB Mounting Bracket
Mounting bracket for TFB(X)

ZG LF 112 - Crankarm Adaptor Kit.

The ZG-LF112 Crank Arm Adaptor Kit includes: 1 ZG-112 Mounting Bracket 1 KH-LF Crank Arm with Retaining Clip 2 Bolts with Nuts NOTE: May require crank arm and ball joint

TFB Crankarm Adaptor Kit with Bracket. TFB(X) crankarm adaptor kit (includes ZG-113).