BAS Combo Starter/Disconnect 1/10 thru 1hp 120v/230v
The BAS-1P protects single phase motors with an adjustable 1-16A class 10 electronic overload.

The Acudor CD-5080 is a hingeless duct door for sheet metal ducts. The CD-5080 assures a tight seal without obstruction in the air system.

The Acudor UF-5000 is a universal flush, metal access door for walls and ceilings. This door has been designed for installation in all types of flush surfaces.

The NS-100 Filter Holding Frame is a 16 gauge Galvanized Steel Holding Frame. The NS-100 includes a pair of Ludwig Clips and a foam gasket. Designed to hold many different filters, these can be used individually or in a filter bank.

Basic Fail-Safe actuator for controlling dampers in typical commercial HVAC applications. Torque motor 180 in-lb [20 Nm]. Nominal voltage AC 24...240 V / DC 24...125 V. Control On/Off.

The LF series actuators provide true spring return operation for reliable fail-safe application and positive close off on air tight dampers. The spring return system provides consistent torque (35 in-lb [4 Nm]) to the damper with, and without, power applied to the actuator. The LF series provides 95° of rotation and is provided with a graduated position indicator

The NFB series actuators provide true spring return operation for reliable failsafe application and positive close off on air tight dampers. The spring return system provides constant torque (90 in-lb [10 Nm]) to the damper with and without, power applied to the actuator. The NFB series provides 95° of rotation and is provided with a graduated position indicator.

The TF series actuators provide true spring return operation for reliable fail-safe application and positive close off on air tight dampers. The spring return system provides consistent torque (22 in-lb [2.5 Nm]) to the damper with, and without, power applied to the actuator. The TF series provides 95° of rotation and is provided with a graduated position indicator showing 0° to 90°.

Select the Series 2000 Magnehelic® Gage for a versatile low differential pressure gage. Using Dwyer’s simple, frictionless Magnehelic® gage movement, it quickly indicates air or noncorrosive gas pressures--either positive, negative (vacuum) or differential. The design resists shock, vibration, over-pressures and is weatherproof to IP67.

Equipped with advanced I/O including Fireman’s Override and damper control, the BAS was designed from the ground up for easy integration with automation systems. With a 200 to 600V input and 1-40A adjustable overload, the BAS is the right starter for almost any job.
Available in the following models with Type 1 enclosure:

Designed for variable torque applications up to 600 hp (480V)*, the Cerus® X-Drive is Franklin Electric’s all-inclusive drive solution for a variety of markets. Available as a standalone drive, no disconnect or bypass included, in the following models:

Designed for variable torque applications, the Cerus® X-Drive is Franklin Electric’s all-inclusive drive solution for a variety of markets. Available with disconnect and Type 1 enclosure included, in the following models:

Replacement Fusible Links for Ruskin Fire Dampers

Backdraft Damper with Aluminum Blades and Frame, actual size 1/4" undersized

Backdraft damper for circular duct. 25GA galvanized steel casing, spring loaded aluminum butterfly blades, EPBM syntetic rubber gasket, SS torsion spring,

The CD36 commercial control damper offers sturdy, galvanized steel construction with interlocking frame design. It locks together without bolts, screws, or rivets that could shake loose featuring: Galvanized rectangular frame, v-groove blades, class II leakage, medium duty, 3000 FPM, 5" w.c. max.

The CDRS25 commercial control butterfly damper installs easily in round spiral ductwork featuring: Galvanized round frame, dual skin blade, class II leakage, heavy duty, 4000 FPM, 10" w.c. max. With factory mounted actuator braket

Galvanized rectangular wall cap.

Galvanized round wall cap.

Polyethylene fabric, mechanically locked to the duct helix without the use of adhesives. Made from corrosive resistant galvanized steel, the duct helix is mechanically formed to attach the duct fabric without the use of adhesives. Formaldehyde-free fiberglass insulation. Round flex duct, 25'L, Type 1, R6, +10" & -10" pressure class